Key Takeaways
- Technical debt is the future cost of choosing a faster solution now instead of the proper one.
- It differs from messy code because it often reflects a conscious, reasonable trade-off, not sloppy work.
- Debt builds up from deadlines, aging technology, skill gaps, skipped architecture, and unreviewed AI-generated code.
- Unmanaged debt slows delivery, raises maintenance costs, and limits capacity for new product work.
- Teams should measure debt with tools or effort estimates, then prioritize and repay it continuously.
What is technical debt?
Technical debt is the future cost of choosing a faster or simpler software solution today that requires additional work later. It may be deliberate, such as postponing refactoring to meet a deadline, or unintentional, when the consequences of a decision emerge over time.
Ward Cunningham introduced the metaphor in 1992 while working on WyCash. He explained it as follows:
“With borrowed money, you can do something sooner than you might otherwise, but then until you pay back that money you'll be paying interest.”
Like financial debt, technical debt enables faster delivery but creates “interest” through increasing complexity, slower debugging, harder onboarding, and more expensive changes. Code debt, tech debt, and software debt are commonly used as synonyms.
Technical debt is not messy code
Technical debt is not simply poor-quality code. As Robert C. Martin (Uncle Bob) puts it: “A mess is not a technical debt. A mess is just a mess.”
A deliberate trade-off can be perfectly reasonable. The problem begins when the resulting obligation is ignored. Technical debt is ultimately about future development costs created by today's decisions.
Types of technical debt
Technical debt can appear in more places than the codebase itself. Understanding its different forms makes it easier to recognize debt early and decide what needs to be addressed first.
Two frameworks are particularly useful: Martin Fowler’s Technical Debt Quadrant and the classification developed by Steve McConnell.
Fowler’s quadrant divides debt along two dimensions: reckless vs. prudent and deliberate vs. inadvertent. This creates four types:
- Reckless and deliberate: knowingly choosing a shortcut while disregarding its long-term consequences.
- Prudent and deliberate: consciously accepting debt because delivering now has greater value.
- Reckless and inadvertent: creating debt because the team lacks the knowledge or experience to recognize a better approach.
- Prudent and inadvertent: discovering that a previously reasonable solution is no longer appropriate as the team learns more about the product or technology.
McConnell’s simpler classification distinguishes between intentional and unintentional debt. Both frameworks highlight the same important point: not all debt is created in the same way, and not all of it should be treated with the same urgency.
The metaphor can also be applied beyond implementation. Technical debt examples can include:
- architecture debt,
- infrastructure debt,
- dependency debt,
- documentation debt,
- testing debt,
- and security debt.
Each can increase the cost or risk of future development.
There is also UX debt — product decisions that make an experience harder, less consistent, or less accessible than it should be. UX debt can emerge when teams prioritize shipping functionality over usability, postpone design improvements, or accumulate inconsistent patterns across a product. Like other forms of debt, it can be paid off incrementally as part of ongoing product development.
What causes technical debt?
Technical debt rarely comes from one bad decision. It usually accumulates through everyday trade-offs around deadlines, changing requirements, technology, and team capabilities. Understanding what causes technical debt helps teams address its sources before it becomes a serious delivery constraint.
Time pressure and unrealistic deadlines
Teams may know how to build something properly but lack the time to do it. The 2013 HealthCare.gov launch illustrates the risk: a compressed schedule contributed to system failures and incomplete functionality, followed by extensive remediation.
Deadlines are not the problem themselves. Repeatedly postponing technical work is.
Technology ages over time
Technology also creates debt simply by evolving. Frameworks change, dependencies become unsupported, APIs are deprecated, and security standards move forward.
A system that was technically sound five years ago may therefore become expensive to maintain today. This is one way a legacy system emerges: technical debt accumulated without systematic repayment.
Prioritizing time-to-market
Startups often consciously trade maintainability for speed. That can make sense when validating an idea or launching an MVP. The problem begins when the product grows but the team never revisits the shortcuts it took.
What was once a useful compromise can eventually become an architectural constraint.
Skipping architecture and design
Starting development without sufficient upfront planning can lead to ad hoc decisions and architectural debt. Because early design choices shape the entire system and are very difficult to reverse, this type of debt can be particularly expensive to address later.
Knowledge and skills gaps
Technical debt can also be unintentional. Developers may use unsuitable patterns because they lack experience, or teams may adopt new technologies without sufficient training. In Fowler's Technical Debt Quadrant, this falls under inadvertent debt.
Outdated technologies and dependencies
Unmaintained dependencies, deprecated APIs, and outdated infrastructure can create technical debt, including security vulnerabilities and compatibility issues. The more complex and costly they become to implement.
This is particularly relevant to legacy systems, where years of accumulated decisions can make modernization increasingly difficult.
AI-generated code without review
AI-assisted development introduces a newer source of potential technical debt. LLMs can generate functional code quickly, but without clear coding rules, sufficient context, and effective prompting, the output may be inconsistent with the existing architecture, unnecessarily complex, or based on incorrect assumptions about the system.
Without proper code review, issues in AI-generated code can go unnoticed and gradually reduce the maintainability of the product. At Merixstudio, AI is integrated into the development process with engineering practices that keep human review and architectural consistency in the loop.
Lack of ownership and documentation
When architectural decisions are not documented and ownership is unclear, teams can lose both the context behind existing solutions and accountability for maintaining them. New developers may introduce workarounds simply because they do not understand why a particular approach was chosen or who is responsible for it.
Architecture Decision Records (ADRs) preserve the reasoning behind key decisions, while clear ownership helps ensure that architectural choices are reviewed and maintained over time. Together, they help prevent technical debt from accumulating due to lost context and neglected responsibilities.
Is technical debt slowing down your product? If legacy code, outdated technologies, or architectural constraints are making development increasingly difficult, it may be time to consider modernization. How can you reduce technical debt without disrupting ongoing development? Explore our Software Modernization Services to see how Merixstudio approaches modernization step by step.
The real cost of technical debt: consequences for your business
Technical debt affects more than engineering teams. It reduces development capacity, increases operational costs, slows product delivery, and makes it harder to adapt to changing requirements. If left unmanaged, it can limit a company's ability to innovate and respond to market demands.
McKinsey reports that organizations can lose 10–20% of technology capacity to technical debt, while CISQ cites Stripe's estimate that developers spend around 33% of their time dealing with technical debt and legacy code.
Slower delivery and higher costs
As requirements evolve, new features are often built on top of existing solutions, even when those solutions no longer fit the system's needs. Over time, this increases codebase complexity and makes dependencies harder to understand. Developers must spend more time assessing the impact of changes and ensuring they do not break existing functionality. As a result, even small changes take longer to implement and become more expensive.
Higher maintenance and operational risk
Poor documentation, outdated dependencies and insufficient test coverage can make systems harder to diagnose, patch, and update safely. This increases the risk of production incidents and can make resolving them more time-consuming, while unresolved security issues may also increase security and compliance risks.
Less capacity for innovation
The biggest cost may be opportunity cost. Engineering capacity spent working around legacy constraints cannot be used for new products or responding to market changes.
With Facta, technical refactoring and UX improvements resulted in 80% less work required for monthly closing. The benefit went beyond engineering: it reduced operational effort.
The real cost of technical debt is therefore not only what it costs to fix, but what the business cannot do while carrying it.
How to measure technical debt
You cannot effectively manage technical debt without understanding where it exists, how it affects the system, and how expensive it will be to address. Technical debt measurement therefore turns an abstract engineering problem into something teams can track and discuss with the business, and then prioritize.
Technical Debt Ratio
One of the most widely used metrics is the Technical Debt Ratio (TDR). It compares the estimated cost of fixing existing debt with the cost of developing the system from scratch:
TDR = Remediation Cost / Development Cost × 100%
The SQALE approach uses the ratio to indicate the overall health of a codebase:
- A (<5%) — low debt
- B (5–10%) — moderate debt
- C (10–20%) — high debt
- D (20–50%) — very high debt
- E (>50%) — critical debt
For example, a TDR of 8% means that fixing the identified technical debt would cost approximately 8% of the effort or budget required to develop the system from scratch.
The number alone is not enough, though. Teams should also understand where the debt comes from and what business risks it creates.
Tools and practical measurement
Tools such as SonarQube and SonarCloud can estimate remediation effort and calculate a technical debt ratio across a project. Other tools, such as CodeClimate and NDepend for .NET, can help identify code quality issues and assess maintainability, providing additional context for understanding and managing technical debt.
Beyond measuring the technical debt ratio, the SQALE method helps teams interpret code quality issues in the context of software quality characteristics, such as testability, reliability, changeability, efficiency, security, maintainability, portability, and reusability. This broader view helps teams prioritize remediation based on the impact of debt on software quality rather than simply the number of issues identified.
For teams without dedicated tooling, an effort-based approach can be just as useful. Identify known issues and estimate the developer hours required to address them. Tracking remediation effort makes technical debt easier to quantify, prioritize, and communicate to business stakeholders.
Finally, technical debt can be tracked directly in Jira, Linear, or GitHub Issues. Tagging debt-related work and reviewing it regularly provides a simple way to monitor its volume, type, and estimated effort. An increase in reported technical debt does not necessarily mean the team is accumulating it faster than it is repaying it, as it may also reflect improved awareness and more effective identification of existing issues.
A good way to make technical debt actionable is to measure it consistently. But which metrics should you track, and how do you turn them into a practical repayment plan?
Download our free “Modernize and Grow” ebook to get a practical framework for measuring technical debt, including indicators such as bug resolution time, bugs per sprint, Defect Removal Efficiency (DRE), test coverage of critical paths, and library versions as a security indicator.
The ebook also covers three practical strategies for paying down technical debt without bringing product development to a halt.
How to manage and reduce technical debt
Technical debt management is not about stopping feature development to “clean up the code.” The goal is to make debt visible, prioritize it by business impact, and repay it continuously.
1. Make debt visible
Start by assessing the codebase, architecture, infrastructure, dependencies, testing, and UX. A Discovery phase can help identify and prioritize problems before refactoring. For Hozint, Merixstudio analyzed the existing platform before redesigning a system processing 150,000 alerts monthly and storing 8 million alerts.
2. Prioritize by impact
Not every issue needs immediate attention. Prioritize debt based on development friction, production risk, security exposure, and how often the affected area changes.
3. Repay it continuously
Small improvements are usually more sustainable than occasional cleanup projects. Refactor code while modifying it, update dependencies, strengthen critical tests, and document architectural decisions.
4. Know when to modernize
Sometimes incremental refactoring is no longer enough. When architectural constraints affect most new development or infrastructure becomes obsolete, broader software modernization may be the better approach.
Bookingkit is a great example: introducing an API Gateway in Go and moving towards a sharded architecture resulted in 2x faster API responses, addressing architectural constraints at their source.
5. Address infrastructure debt
Infrastructure debt often requires more than isolated fixes. Outdated technologies, inefficient data access patterns, and scaling limitations may call for broader modernization to improve performance and support future growth.
SafeEx required deeper infrastructure modernization, including a MySQL-to-PostgreSQL migration and Redis and Celery implementation. The result was approximately 10x fewer database queries and 10x faster view loading.
6. Include UX debt
Technical debt can also exist in the product experience. Inconsistent interfaces and accumulated UX compromises can make products harder to evolve. Addressing them as part of a broader redesign can therefore be another form of debt repayment.
When technical debt becomes too extensive to address within regular development cycles, the question changes from how to refactor to whether the system needs broader transformation. At this point, teams need to evaluate the cost of continued maintenance against the value of modernization. Our guide to software modernization explores the approaches, strategies, and trade-offs involved in modernizing legacy software.
What is the Technical Debt Quadrant?
Martin Fowler's quadrant categorizes debt as reckless or prudent and deliberate or inadvertent, helping teams understand why the debt was created and how it should be managed.
How much technical debt is acceptable?
There is no universal threshold. The key factors are its cost, risk, and impact on development. Manageable debt is understood and controlled; problematic debt increasingly constrains delivery or creates significant risk.
Keep technical debt under control
Technical debt is an inevitable part of software development. The problem is not having debt, but allowing it to accumulate without a plan. A healthy approach rests on three principles: take on debt consciously, repay it regularly, and keep its cost visible to both engineering and business stakeholders.
At Merixstudio, we work with products at different stages of maturity — from greenfield development to the modernization of complex legacy systems. Whether you need to assess an existing codebase, reduce accumulated debt, or plan a broader modernization effort, the first step is understanding where the debt is and what it is costing your business.
Explore our software modernization services to learn how we can help you modernize your software while keeping product development moving.
FAQ
Technical debt is future work created by choosing a faster or simpler solution today that costs more to change later.
Outdated dependencies, missing tests, insufficient documentation, postponed refactoring, architectural shortcuts, obsolete infrastructure, and inconsistent UX are common examples.
No. Deliberately taking on debt can be reasonable when speed or time-to-market matters. The problem is unmanaged debt that is never repaid.
A bug is a software defect. Technical debt is the future cost created by a technical decision or compromise. Debt can exist without bugs.
Use the financial analogy: a shortcut delivers value today but creates repayment costs later. Those costs can appear as slower releases, higher maintenance expenses, or reduced engineering capacity.
As debt grows, changes require more investigation, testing, and workarounds. Supporting old and new approaches simultaneously can further increase the cost of each release.
Martin Fowler's quadrant categorizes debt as reckless or prudent and deliberate or inadvertent, helping teams understand why the debt was created and how it should be managed.
There is no universal threshold. The key factors are its cost, risk, and impact on development. Manageable debt is understood and controlled; problematic debt increasingly constrains delivery or creates significant risk.
.webp)

.webp)
%2520(1)_11zon.webp)
.png)
.avif)

.avif)
.avif)
.avif)